| |
Shop
| |  |
|
Best Sellers | | Home Slik Pro 330DX Tripod With Head (Black Legs) - 613331 | |
|  | |  | | | Slik Pro 330DX Tripod With Head (Black Legs) - 613331 | | | | | SKU:
SL330DB | | Availability:
Out of stock | | | | | | The latest metal, SLIK's exclusive A.M.T. super titanium alloy legs make the PRO 330 DX lighter weight than similar tripods, but with more rigidity for a more secure hold on your camera. It folds down small to just 23.5 inches and weighs just 3.5 pounds making this tripod great for traveling. The emphasis on the PRO 300 DX is ease of use. Any tripod should be easy to use, so that that you spend more time concentrating on your subject, and enjoying your photography, than you do stressing about and fussing with your equipment. The lightest of the PRO series, the PRO 330 DX makes setting up easy with secure, yet fast speed release leg locks, gearless center column for quick height adjustments, and 3 position adjustable angle legs for easy set up on uneven ground or steps. This adjustable angle feature can also be used to lower the camera for extremely low angle or macro photography out in the field. Despite its featherweight and ease of use, the PRO 330 DX can hold nearly 8 pounds of camera and lens. Perfect for the photographer with a digital camera or lightweight SLR camera and lens. Plus the head is removable, so that a variety of other heads, like one of the SLIK ball heads, can be used in place of the included all-metal 3-way pan head with quick release. With its application of lightweight super alloy, the SLIK PRO 330 DX presents an economical alternative to the more expensive carbon fiber tripods, allowing you to travel light, on any budget. | | | | | |
|
| | Product Details | | Product Weight: | 4.2 pounds | | Package Length: | 24.5 inches | | Package Width: | 5.6 inches | | Package Height: | 4.7 inches | | Package Weight: | 4.4 pounds | | Average Customer Rating: |  based on 12 reviews |
| |
| | Features | SLIK A. M. T. alloy offers an exceptional strength-to-weight ratio more than 40% greater than similar tripods.The easiest to use leg lock Lift lever to unlock, push lever to lockReleasing the Center Column Locking Collar frees movement of the Center Column, in both vertical and horizontal directionsChoice of three different leg angles for quick set up on inclined or uneven ground.Top section leg diameter 26.8mm
| |
| | Customer Reviews | Average Customer Review: ( 12 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
14 of 16 found the following review helpful:
 Modidied SLIK 330DX Jul 30, 2009
By Richard P. Crowe
"rpcrowe"
I wanted a really lightweight travel tripod to supplement my full-size Giottos MT-8180. The stock SLIK Pro 330DX offered me a good lightweight tripod which, with two modifications, has become an excellent tripod that is light enough to carry boonie tromping and is small enough to fit in my airline luggage.
I first replaced the stock center column with the optional shorter column sold as an accessory. I do not believe that a lightweight tripod such as the 330DX should be used with an extended center column. Another option would have been to shorten the stock center column by sawing off a portion of its length. However, I opted to use the accessory column as a more professional looking modification.
Secondly, I replaced the rather heavy stock SLIK pan/tilt head with an Adorama Flashpoint F-1 Arca Compatible magnesium ball head. This head not only considerably reduces the total package weight but allows the use of a Really Right Stuff L-Bracket. The RRS L-Bracket increases stability by eliminating the need to cantilever the camera/lens over to the side of the head when using a non-tripod-ring equipped camera/lens in the portrait position. This head provides a significant advantage in stability while lowering the total weight of the modified tripod/head package.
The modifications reduce the weight of the SLIK Pro 330DX tripod/head package from its stock 3.5 pounds to only one pound, eleven ounces yet allows me to adequately support my 1.6x cameras with either my 17-55mm f/2.8 IS or 70-200mm f/4L IS lenses. The modified tripod/head has performed very well; even in some rather heavy winds while photographing Bryce Canyon, Utah.
The one drawback with this package is that it is fairly short in height. I adequately compensate for the lack of height by using a right-angle viewfinder which weighs only an ounce or two and allows me to comfortably shoot from the lower platform. I would give this setup five stars if it were only a bit taller. However, if it were taller, it would also be heavier. I wish that the SLIK Pro 330DX had been available without the need to purchase the pan/tilt head but, tripods in this price range are usually not offered without a head.
I really like my modified SLIK Pro 330DX and since it is so light and small of a package; I can carry it everywhere with no problems.
7 of 7 found the following review helpful:
 Excellent value Jun 26, 2010
By Benjamin
I choose this tripod after reading favourable press reviews, in its price range it stood out as the best.
I'm not disappointed. It's lightweight yet strong, the slender legs proving remarkable stable. They are easy to use, and while they can be set in any position, they lock into three set positions, one of which brings the tripod head very close to the ground at . The maximum usable height is 1.6m, and while the spec sets the minimum height at 51cm, it will in fact go down to 29cm by unscrewing the bottom half of the centre column. It is designed for equipments weighing up to 3kgs (6lbs 10oz)
The tripod is well made, all the mechanics having the feel of quality, with perhaps a couple of exceptions. One is the rather slight plastic clips that secure the leg extensions, they do not look as though they would stand up to rough handling; but they do have the convenience that when together the two clips on each leg can be operated as one. The other exception is the quick-release plate on the tripod head, in which there is some play, I would have liked a more solid fixing.
But all in all the tripod is a pleasure to use. With locking handles for both vertical tilt and pan-and-tilt, and a pan locking nut, sett the camera is easy. The pan head itself is surprisingly compact, and one thing I am particularly pleased about is that access the battery compartment on my Canon is not obstructed, I do not have to remove the camera from the tripod head to change the battery. The top section of the legs has a soft grip covering making it comfortable to carry, and the legs have non-slip rubber tips. For the price I think you will find it hard to beat.
6 of 6 found the following review helpful:
Solid yet very lightweight Dec 08, 2008
By Dr. Moebius
Sturdy, well-designed tripod for use in and out-of-doors. Fits in my suitcase for travel. I swapped on a ball head. The insulated grips and extremely light weight make it a joy to carry. The leg-independent three-angle positioning offers a degree of versatility unmatched.
5 of 5 found the following review helpful:
A Terrific Little Tripod Jul 19, 2010
By D. Stevenson
I have used Slik tripods for years and I have always been very happy with them. Although plastics and lightweight metals are commonly used I have never had any problems with them holding up. I have one Slik U8000 tripod that I have had and used for over 10 years with no trouble.
Let's talk about the Slik Pro 330DX. This is a very nice tripod. It is light and easy to carry. It came with a pan tilt head which was not what I really wanted so I have replaced it with a Manfrotto 484RC2 ballhead. I use this tripod and ballhead combination for my product photography. When I am out hiking or backpacking, I use a Flashpoint F1 ballhead (which can also be purchased here at Amazon). This reduces the overall weight of the tripod and head to less then 3 pounds, which makes hiking with this tripod a whole lot easier. Overall, for me, this makes for a great setup. I have been using this tripod for over 3 months now with no problem whatsoever.
Now, I need to be absolutely clear. This tripod is not going to be adequate to support and stabilize most digital single lens reflex cameras. If you have a larger camera then you need to find a better tripod. But this one works quite well when using lighter digital point and shoot cameras as long as the weather is calm. I use the tripod combinations described above for my Canon Powershot G10 which weighs a couple ounces less then a pound. I have also used this combination for my Pentax ZX-60 35mm single lens reflex camera with the 50mm lens, which weighs a little more then a pound. Technically it is supposed to support equipment that weighs a little over 8 pounds but I would be nervous using something this heavy. I don't doubt it will hold that much weight but stabilizing cameras for photography is about reducing vibration as well so you need to be careful with a tripod that is this light. I personally would not consider using it for anything heavier then 3 or 4 pounds, or for any lenses longer then 100mm. Even when using it with light equipment, if a medium wind begins to blow then I recommend you attach some weight to the bottom of the tripod to further stabilize it. I have modified my tripod with an eyebolt on the bottom of the center column that allows me to attach my backpack, a camera bag, or use my foot looped through a bungie cord, to apply down pressure to the tripod while I'm using it so it dampens the vibration caused by the wind.
Slik has cut a few corners with this tripod to cut the weight down and to keep the cost low. For example, the leg locks are made of plastic. So far they have worked quite well for me and as long as I am careful with them I don't anticipate that they will present any problems. However, they do represent a potential failure point that you should be aware of. Another possible problem has to do with the height of this tripod. With my Canon Powershot G10 attached to the quick release on the Manfrotto 484RC2 ballhead, the camera is exactly chest height on me, and I am 5' 10" tall. Since I am usually using the rear display screen of the G10 the height of the camera is not a big problem for me, but if you are trying to use an optical viewfinder it would present a problem because you will have to stoop over all the time to look through your viewfinder. They have also used a 1/4-20 thread stud to attach the tripod head rather then the more common 3/8 thread. If you want to replace the head be sure to find one that will accept the 1/4 inch threaded stud, or find a 3/8 to 1/4 inch bushing to fit the tripod head you are planning on using.
So, in order to get the most from this tripod there are a few things you should be aware of. Purchase and install a ballhead and don't forget the 1/4-20 threaded stud. Do not plan on overloading it with large or heavy equipment. Use only lightweight cameras and shorter lenses. Develop a means to stabilize the tripod, especially when the wind comes up. Be prepared to stoop over a lot if you use an optical viewfinder instead of a display screen with live view. Be gentle and don't beat this tripod up too badly since the leg locks are made from plastic and the legs are light aluminum alloy which can easily be dented or bent.
There is a definite positive side to this tripod as well. The legs can be spread individually to accommodate uneven ground. The tripod legs can be deployed so that the camera is very close to the ground for macro work. It is extremely light and easy to pack with you. The price is certainly right. You can use aftermarket ballheads with it. Of course, if it fits your need, the pan tilt head included with this tripod is made of metal and is actually quite solid.
If you understand and can work within some very specific limitations, this is an excellent piece of equipment. By making a few, very simple, modifications, this tripod makes a terrific, very small and lightweight, backpacking tripod. If you have been researching tripods you know that you can easily pay $500 or more for good gear. It is really unusual to get extremely light gear like this, that works as intended, for less then $100. Add in a decent ballhead for $50 to $75, depending on what you buy, and you have a very, very nice tripod that rivals the weight of a very pricey carbon fiber unit. You may have better luck but, for what I needed, I could not find anything for less then $500 that was better then this setup.
3 of 3 found the following review helpful:
Excellent Value Jan 18, 2011
By Bigdogbeau
You can't beat this tripod for the money. One misconception I had and a I think a few others do also is that you need to buy a short center column to lower the tripod to it's lowest position. I'm not sure about all of them but my center column is a long two piece that unscrews so that only the short column is in place. Given the max height of this unit I'm pretty sure they are all like mine. Check with each Seller but they should all be the same. There is one thing I would prefer but it wasn't a big enough issue to not rate this 5 stars. The leg locks would be nicer if the tension was adjustable but as long as they do not loosen over time this whole thing is a 5. I also agree with a few other reviews in that the weight rating seems to be really low. Don't take my word for it because I have no super heavy lenses but this thing is solid as a rock. Folded length is fine, I'd even take this on a hike with no problem. I bought the pan instead of ball head because I do shoot quite a few pano's. The head is also really well built and the quick release is works very well. This is an excellent tripod. If anything happens to this one I would not hesitate to buy another.
See all 12 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed Gift Categories | You may also like ... |
