 | |  | | | Neiko 01407A Stanless Steel 6-Inch Digital Caliper with Extra-Large LCD Screen and Instant SAE-Metric Conversion | | | | | SKU:
caliper-bw0222022 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | When you require exact measuring, you reach for a caliper. But an accurate measurement is meaningless if you can't read it accurately. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001-Inch. Instantly converts from SAE or Metric, the display can be zeroed at any point on the slide. Machine-grooved thumb-roll mechanism and position lock for sure adjustment. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. On-off switch with auto-off, two long-life batteries included (one spare). | | | |
List Price:
| $19.99 | |
Our Price:
| $15.69
& eligible for FREE Super Saver Shipping on orders over $25.
| |
You Save:
| $4.30 (22%)
|
| | |
|
| | Product Details | | Product Length: | 6.0 inches | | Product Width: | 1.0 inches | | Product Height: | 1.0 inches | | Product Weight: | 0.0 pounds | | Package Length: | 9.8 inches | | Package Width: | 3.8 inches | | Package Height: | 1.1 inches | | Package Weight: | 0.7 pounds | | Average Customer Rating: |  based on 184 reviews |
|  |
| | Features | Easy to operate, one button to switch between inches to mmHardened stainless steel shaft with depth-measurement probe, precision ground jawsResolution: 0.01mm/0.0005 inch, Accuracy: 0.02mm/0.001 inchFeatures with a large LCD display, easy to take readingsTake measurements from 0 to 6-inches, comes with 1-year warranty
| |
| | Customer Reviews | Average Customer Review: ( 184 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
76 of 79 found the following review helpful:
 Excellent !!! Oct 18, 2008
By Lew
For the money, you cannot beat this product. I work in a Navy calibration laboratory and calibrated it with gage block standards and it was right on, dead nutz.
65 of 68 found the following review helpful:
Versatile, easy to use and accurate Feb 13, 2007
By In the Middle of the Road
If you want analog, this is not for you. I've got three calipers including this one. One is metric only. Another is inches only. And then here's this one which does both with very good accuracy.
It has a good solid feel and the digital readoutis handled by three simple button controls. I frequently use it in preference to the more expensive alternates because it's accurate and I sometimes want to do both inch and metric measurements without having to use a second tool.
It does not offer an alternatie analog readout except in the crudest terms. It shouldn't.
27 of 28 found the following review helpful:
Digital Calipers Sep 04, 2007
By M. Augustis
What a bargain? This product allows me to make high resolution measurements in multiple directions. It has a digital readout that switches from US to Metric redouts, and is very durable stainless steel fro an excellent price.
13 of 13 found the following review helpful:
Cannot be beat for the money May 01, 2009
By Consumer
"PR"
I bought these to use for reloading ammunition, where thousandths of an inch count. I compared these against my father's calipers, bought from a big-name hunting retailer specifically for reloading, which cost almost 3X as much (and even those are at the lower end of the price spectrum.) I found these to be just as good if not a little better than the comparison. These are good, solid steel design that can measure several different ways. I only found a few less than perfect things:
1) When the unit is turned off, it takes a second or two for the screen to turn on once you start opening the calipers if you do not press the "on" button. On the higher priced calipers, this was instantaneous
2) When taking a measurement in the thicker, middle section of the calipers, I get different readings if taking the measurement at the top-middle portion vs. the bottom-middle portion- This tells me that the jaws are not sitting perfectly square. My difference in measurement was off by .0005", well within my tolerances for reloading.
Overall, for the price I paid, I am very satisfied.
19 of 21 found the following review helpful:
Surprisingly well made and solid feel Jul 10, 2007
By G. Lee
"Addicted shopper"
I was surprised to see how well made this tool is. The actual calipers were machined with precision and fits together very well when closed. The moving parts all operate smoothly. The zero at any point is a good feature if you want to measure differences. Also, to have both metric and SAE on the same unit is just gravy. I might had gotten 800 on my SAT back in the day but now I can barely calculate changes at McD...
See all 184 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
