• Comfort grip handpiece - allows finger tip control to cut, grind, sand, sharpen, polish and more!

• Integrated shaft lock button on the handpiece allows for easy accessory changes.

• Quick connect - easily attaches to your DREMEL rotary tool

• More flexible cable - provides more comfort during use.

• For use with rotary tool models 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800

The only thing that annoys me about the flex-shaft is that it won't accept a chuck to secure the bits, just collets. This can be a major frustration when I'm doing work that requires constant bit changes, with different bit diameters. Just when I thought I was rid of those pesky collets forever...

`Late

27 of 27 found the following review helpful:


my wrist won't die from Carpal Tunnel, now!  Dec 07, 2009 By Terrakian Wintermoon "Alien-Eyes-Creations"
I've had my 350 series Dremel for over ten years, now, and that poor workhorse of a tool has seen a LOT of use in that time, carving everything from wood to bone to amber to turquoise. My only beef about that awesome little bit of technology is the amount of vibration it puts my wrist through- ouch. If I've been going for a couple of hours (my average time on it is three hours at a stretch), my hand is a distorted, cramped up mess due to the vibration...

Enter the flex-shaft. I got to try one of the old ones (the plain, black cased pen type) a bunch of years back, and I'd loved it then, but couldn't afford one. They were still fairly new, and I was just starting out with learning how to use my tool anyway. But I'm getting serious into the carving, lately, and my wrist just couldn't handle it, so I went nosing around for that wonderful little pen I could carve with and found the new model here. At first, I was worried that it wouldn't be compatible with my beastie, which was old when I got it as a gift, but I looked up the specs, did some digging and found that it should fit with my model.

Awesome.

So I ordered it. :)

Got it in less than a week and a half, and I immediately went for the little set of instructions, read 'em, did all the prep stuff to set it up, and started playing around with some silver I'd been saving to polish. Yes! I could work without my poor hand going numb! More awesome.

So, all that windy blather aside, I'm happy with the flex-shaft. It's everything I'd hoped for it to be: lightweight (definitely an issue with my joints), easy to use, and quite compatible with my old Dremel. I should have gotten one these ages ago!

27 of 27 found the following review helpful:


Possibly the greatest Dremel Attachment Ever Made  Dec 11, 2005 By Ethan "Fizzler" West "King of Nerds"
They have the MultiSaw, they have the Chuck, even the magnet-powered Dremelite, but nothing comes close to the Flexshaft. This baby is THE essential attachment for a Dremel. It comes with easy-to-read instructions on How to put it on, and it even has a diagram showing the different parts and the part numbers. (in case something gets broken, as in my case). This thing is incredible. I polish silver Quite a bit with my Dremel, and this thing makes it easy to get into those ultra-hard-to-reach areas. (my current project is a silver clarinet of my grandmother's). If you only get one attachment for Your Dremel, This one is way out in front for the choice. (just don't put it past 30000 RPM unless you have the flex-shaft tool holder, not that anything bad will happen, it just makes this annoying chattering noise).

5 out of 5

20 of 21 found the following review helpful:


good tool overall but...  Aug 27, 2008 By Osorio Batres Silvia Rebeca "booknut"
I wont repeat what everyone else has said about this being a fine tool,It is and my only gripe about it is that it is not really a heavy duty piece. If you try to grind a cylinder head port you will find out fairly quickly that this flex shaft is for light duty only and will overheat and or become disconnected internally. Otherwise it works very well on all manner of things.

9 of 9 found the following review helpful:


Flex shaft is great  Dec 18, 2009 By Alicyn
I use my dremel to drill holes in glass. The flex shaft is great because it's easy to handle and allows me to drill into water without risking putting my dremel into water. I also like using it with the foot pedal and the chuck. The flex shaft does what it says it does and does it well.

See all 61 customer reviews on Amazon.com